[Simple]

OK, I’ve finally made this tutorial.

Warning! The gun I’m going to show you is really bad, so this is just made to let you understand the basic of making a gun. Understood?

And by the way, you need to have some experience with PP 2007. If you don’t have, look at the other very simple tut I made for beginners:
How to make simple 3D in PowerPoint

Anyway, start to make the shapes for the gun.



Remove the line & add colors.



Add 3D-format on your shapes. I often have 1 in width.



Put the gun together. > Mark all the shapes (Ctrl+a) > Right-click > Group



Rotate it, and it’s totally screwed up.



Keep on rotating it till you reach 90°, then, click at one of the shapes.
Now use this “distance from ground,” as marked in the red spot on the picture, and see what’s happening.



There! The shitty gun is done!



Train, and after a little while, you can make guns like those. Maybe better!

^Made in PowerPoint^


Good luck!